In ceramic workshop

I try to use ceramics to make objects. I first tried the drawing of the embryo and found that it is still quite difficult for a novice, and it may take a lot of practice to master this skill. Then I hand kneaded some small objects .

A few days later I attempted to glaze, and since it was my first attempt, I learned the full glazing process on the spot.

However, due to inexperience and the fact that glazes are characterised by a big difference in colour before and after firing, some of the objects didn't turn out particularly well after firing, for example some weren't the colours I wanted, or some of the brushstrokes were too light. These also need to be avoided by accumulating practical experience in the future.

Previous
Previous

Surface texture and crystal glaze attempts

Next
Next

Linen project